Cactus Parameters Request : IOJpeg

Parameters in Cactus can be either fixed or steerable. Steerable parameters are those which can be modified during a simulation. To change steerable parameters, edit the values and press the submit button. Before applying the new parameter value, Cactus will check that the parameter lies in the allowed range. Note that there is currently no log of parameters which have been modified.

The tables below show the parameter name, current value and description. The default value of each parameter is shown in brackets at the end of the description.

Steerable Parameters

The following parameters are steerable, but you do not have authorisation to change them. To change parameters you must first register on the Simulation Control Page.

colormap	auto	How to set the colormap (custom)
colormap_bias	0.5	Bias automatic colormap generation towards red (low) or blue (high) (0.5)
colormap_factor	16	How to scale float values to rgb color (32)
colormap_max	1	maximum value to be mapped to colors (+1.0)
colormap_min	-1	minimum value to be mapped to colors (-1.0)
colormap_quality	75	JPEG quality of level (75)
mode	remove	Output mode to use (standard)
out_every	10	How often to do IOJpeg output, overrides IO::out_every (-1)
out_vars	wavetoy::phi	Variables to output by IOJpeg ()
refinement_factor	20	Refine each 2D slice by a certain factor (using interpolation) ? (1)

Fixed Parameters

out2D_xyplane_z	-424242	z-coord for 2D planes in xy (-424242)
out2D_xyplane_zi	-1	z-index (from 0) for 2D planes in xy (-1)
out2D_xzplane_y	-424242	y-coord for 2D planes in xz (-424242)
out2D_xzplane_yi	-1	y-index (from 0) for 2D planes in xz (-1)
out2D_yzplane_x	-424242	x-coord for 2D planes in yz (-424242)
out2D_yzplane_xi	-1	x-index (from 0) for 2D planes in yz (-1)
out_dir		Output directory for IOJpeg files, overrides IO::out_dir ()

Master Run Page

Environment:

Simulation:

Options:

Parameters:

Check/Modify Parameters

Thorn IOJpeg

Steerable Parameters

Fixed Parameters